41
10. PRECAUTIONS ON USE OF EMERGENCY STOP SWITCH
NOTE : Use the emergency stop switch only to stop operations in emergency. In normal operations, use the stop key of
the upstream unit (collator, etc.) to stop operations.
Set the machine back into the standby state as follows when the emergency stop switch has been
pressed.
Pressing the emergency stop switch may cause paper being processed to remain in the
machine. Remove this paper first.
1
Rotate the emergency stop switch to the
right (clockwise direction) to clear it.
2
Stopping operations using the emergency stop
switch will display “Emergency Stop” on the
control panel.
Emergency stop switch
Emergency Stop
To Next Page
Loading...
