23
10. (Only for machine installed with air knife)
Set Air knife ON or OFF.
If double feed occurs frequently, set the Air knife ON.
Press the SET key.
11. Adjust Suction power.
Select MAX, MID, or MIN.
Press the SET key.
12. Adjust Crease depth.
Select MAX, MID, or MIN.
Press the SET key.
13. Select Speed.
Select FAST or SLOW.
14. Press the SET key to save the settings.
Press the STOP key to cancel the settings.
REFERENCE:
The JOB is registered with different JOB no. by selecting “Save as
different JOB no”.
JOB01entry 21/24
Suction power
MAX MID MIN
JOB01entry 23/24
Speed
FAST SLOW
◀◀ ◀
JOB01entry 20/24
Air knife
ON OFF
JOB01entry 22/24
Crease depth
MAX MID MIN
JOB01entry 24/24
Overwrite JOB01
Save as
different JOB no
To Next Page
Loading...
