No. Name Function
q
Liquid crystal Display
Displays various messages.
w
COVER indicator Lights when a safety cover is open.
e
JAM indicator Lights when a paper jam occurs.
r
PAPER indicator Lights when there is no paper in the paper tray.
t
READY TO RUN
indicator
In the RUN mode, lights to indicate the machine is ready to run.
y
POWER indicator Lights when the power is on.
No. Name Function
q
F button
Function button - used in conjunction with other buttons to execute functions
such as cutting dimension registration.
w
MODE button Switches among the LCD's display modes.
e
SET button
In the RUN mode, pressing this button executes test cutting.
In the SET mode, pressing this button memorizes cutting dimensions.
r
3
button
When the machine is stopped in the RUN mode, or due to a jam, pressing
the + button will move the paper forward, and pressing the - button will
move it backward.
t
4
button
y
RESET button
A multifunction button that when pressed at the same time the STOP button
is pressed,the number of sheets fed and cut will be reset.
If pressed for three or more seconds in the Freesize Input Mode, the current
registered data will be erased.
u
START button
In the RUN mode, pressing this button starts cutting operation (except when
a paper jam has stopped operation).
i
STOP button
Press this button to stop the machine. Also press this button to restart the
machine after it has been stopped by a paper jam (but note that you must
first eliminate the cause of the jam before the machine can be restarted).
To Next Page
Loading...
