- 10 -
3. Procedures for using the machine
Setting the ejection tray in place1
1.
2.
Lift the ejection tray upward.
Hook the slots in the tray's struts onto the pins on both
sides of the machine body. Make sure that the tray is
securely set in place.
Note
¡ The ejection tray can be adjusted to two different
inclination angles. Select the angle appropriate for the
paper's size and quality.
Connecting the power2
1.
Fit the female plug of the power cord (one of the
accessories) into the inlet on the feed side of the
machine.
1.
Move the auxiliary paper tray in the direction indicated by
the arrow.
2.
Insert the power cord's male plug into power outlet.
Setting the auxiliary paper tray3
Power cord
Female plug
Ejection tray
Strut
Pin
Inlet
Auxiliary
paper tray
To Next Page
Loading...
Need help?
General
