- 4 -
CAUTION
Installation location
General operation instructions
¡Install the machine in a level place.
¡Do not install the machine in a place subject
to direct sunlight or near heating equipment.
¡Do not install the machine in a place subject
to extreme temperatures (high or low), or in a
place subject to heavy vibration.
¡Avoid installing the machine in a place with
high humidity, or with large amount of oil,
iron filings, or dust.
¡Do not connect the cutter to a power outlet
that is also used for equipment that
generates noise, such as large-size office
equipment or refrigerators.
¡ Do not use the cutter to cut paper that
exceeds the specification paper thickness.
Doing so could result in breakdown.
¡ Do not attempt to cut paper with staples,
paper clips or any other pieces of metal
attached to it.
¡ Use a dry cloth to remove paper cuttings
collected in the machine and to clean the
rubber rollers or other parts. Be sure to pull
the power supply plug out from its outlet
before cleaning.
Safety instructions
To Next Page
Loading...
