15
6. CONTROL PANEL
If the position of the folding stopper has been finely adjusted in standard folding
operations, the adjustment value can be registered with this key.
A total of 30 different adjustment values can be registered (6 standard folding
modes × 5 standard paper sizes). The registered data is preserved even after the
power is turned off.
To erase the registered data, select the paper size and folding mode to be
erased. Next press this key until the buzzer sounds “pi.pi...” for about two
seconds, and then press it continuously for another two seconds until the buzzer
sounds “pi...”. (Four seconds in total)
Press to register the position of the folding stopper and stacker roller which have
been moved when using custom folding modes.
Up to two individual paper folding modes can be registered for custom folding.
The registered data is preserved even after the power is turned off.
To erase the registered data, continue pressing the custom folding registration
key “1” or “2” registering the data to be erased until the buzzer sounds “pi...”.
When this lamp is lit, it means that the custom folding mode is registered.
The custom folding mode cannot be selected if it has not been registered with the
!1 Custom folding registration key.
Press to select the folding mode from six standard folding modes.
When the power is turned on, the lamp of the single-folding mode lights up. Each
time this key is pressed, the folding mode lamp lights up in order towards the
right.
If a custom folding mode is registered with the !1 Custom folding registration
key, the custom folding mode can be selected.
Displays the folding mode selected from six standard folding modes.
When a folding mode registered with the folding stopper position adjustment
value is selected, the corresponding lamp blinks.
Displays the size of standard paper stacked on the paper feed tray (LGR to INV),
etc.
“6-2. Description of Windows” (
☞
p.16)
Displays the paper length entered, correction value for the folding stopper
position, error messages, and also displays the number of sheets processed by
add-count (add-counter).
“6-2. Description of Windows” (
☞
p.16)
No. Name Operation
!0
!1
!2
!3
!4
!5
!6
Adjustment registration
key
Custom folding
registration key
Custom folding
registration lamp
Folding mode key
Standard folding lamp
Left window
Right window
<Outline of paper folder>
1
2
3
4
A
A
B
B
Folding stopper
Folding rollers 1 to 4
Paper feed ring
Paper feed tray
Folding plate 1
Stacker roller
Folding stopper
Folding plate 2
Flow of paper
eSee
eSee
To Next Page
Loading...
Need help?
General
