To Next Page

To Previous Page

Chapter 2 Basic Operation

Count up

Touch the key.

• Aftersettingthecounterto[0],startthe

operation.

• Ifyoupressthe key without setting the

counterto[0],thepaperfoldingoperation

restarts and the number of sheets set for

processing is incremented from the current

value.

• Whenthecountdisplayreaches[99999],

the machine stops operating. To continue

paper folding processing, return the

counterdisplayto[0]andthenpress

key.

Count down

Using the numeric keypad, enter the

number of sheets to be folded —>

Touch the key.

• Themaximumdisplaydigitnumberis5

digits(99999).

• Whenprocessingofthesetnumberof

sheets to be folded is completed, the

machine stops operation and the count

display returns to the set number of sheets.

• Whenyoutouchthe key and set

thecounterto[0],theusagemethod

is changed back from "subtraction" to

"addition".

• Ifyoutouchthe key without pressing the key, the folding operation restarts and the

number of sheets set for processing is counted down from the current value.

Press the key to start folding.

• Pressthe key to interrupt or stop operation. Press the key again to restart operation.

• Ifthepaperinthepaperfeedtrayrunsout,themachineisputonstandby.Afterstackingpaper,

press the key to restart the operation.

• Whendouble-feedorpapersizeerroroccursduringfoldingoperation,thefedpaperisprocessed

andejected,butthenumberofprocessedsheetswillnotbecounted.

• Whenpaperjamsattheejectingsection,thepaperdetectedaspaperjamwillbecounted,butthe

following paper will not be counted.

Duplo DF-990A User Manual

Other manuals for Duplo DF-990A