To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if the folding stopper of folding plate 1 or 2 does not operate in Duplo Folding Machines?
If the folding stopper of folding plate 1 or 2 does not operate on your Duplo Folding Machine, it is possible that the folding plates 1 and 2 are not set properly. Ensure that the folding plates 1 and 2 are set correctly.
Why is paper not folded at the normal folding position in Duplo DF-990A Folding Machines?
If paper isn't folding at the normal position in your Duplo Folding Machine, it could be due to: * The folding plates 1 and 2 are not set properly. Ensure the folding plates 1 and 2 are set correctly. * Static electricity is built up on the paper. Try using a commercially available static electricity removal spray, separate the paper well, or humidify the area with a humidifier.
General| Type | Folding Machine |
|---|---|
| Max Paper Size | A3 |
| Min Paper Size | A5 |
| Hopper Capacity | 500 sheets |
| Folding Type | Automatic |
| Number of Folding Plates | 2 |
| Folding Types | Letter |
| Paper Type | Bond, Coated |
| Power | 220V, 50Hz |
| Paper Weight | 52-200 gsm |
Details power supply requirements, rated power, and current.
Specifies operating conditions like temperature, humidity, and light.
Explains placement and importance of warning/caution labels on the machine.
Instructions for preparing the machine before installation and use.
Step-by-step guide on how to correctly install the folding plates and other components.
Instructions on how to properly connect the power cord to the machine and outlet.
Explains how to use the touch panel and provides cautions for its operation.
Details the types of paper supported and their size specifications.
Provides guidance on using and stacking paper correctly for optimal performance.
Specifies precautions for handling paper before and during use.
Detailed steps for correctly stacking paper on the feed tray for processing.
Guide to performing standard folding operations using pre-set paper sizes.
How to perform standard folds using paper sizes not automatically detected.
Detailed instructions for creating and using custom folding patterns.
Procedures for performing a cross fold on single-folded paper.
Procedures for correcting folding misalignment when using the DF HAND FEED KIT.
Instructions for cleaning the paper feed rings and folding rollers.
Steps for cleaning various sensors to ensure proper detection functions.
Lists common error codes and their causes and solutions.
Troubleshooting steps for clearing paper jams from different parts of the machine.
A comprehensive guide to common operational issues and their resolutions.
