9. Tools Installation Video Download
https://www.duplousa.com/support/
10. Cutting File Format
10.1 Common format
The default file format for the machine is HPGL, the other adaptable file formats are HPG. PLT. DXF.PDF
and EPS
10.2 Special format
Machine can also import files exported the XML format file from the RIP software such as Onyx/Caldera
PhotoPrint / PrintFactory.
11. How to Export DXF Files in the Adobe Illustrator
Step 1: create a new art board, set width (X direction) and height (Y direction) according to
machine cutting area size)
Width (W): Machine X Direction Dimension Height (H): Machine Y Direction
Dimension Unit: Recommended mm (mm)
To Next Page
Loading...
