Duplo DPC-600PKG - Page 70

- 69 -
17.6 Test
Menu
Items
Functions
Test
Knife action
Control the Tangential tool up/down.
Oscillating tool action
Control the Oscillating tool up/down.
Wheel action
Control the wheel tool up/down.
Test speed
Moving the speed when you press the direction key
Temp origin
Temporary original position setting. Please refer to the red
cursor to move the machine head to any position of the cutting
area, then click Button down and the cutter will start from the
position work.
Manual feed
Click it and the cutter will take the material from the feeder
table