To Next PageTo Next PageWhy does DURAVIT DuraSystem A2 hygiene flush occur too often or too seldom?
If the hygiene flush on your DURAVIT Plumbing Product occurs too often or too seldom, the number of flushes might be incorrectly set. Adjust the number of flush packages.
Why doesn't odour extraction start automatically on my DURAVIT DuraSystem A2 Plumbing Product?
If the odour extraction on your DURAVIT Plumbing Product isn't starting automatically, the manual mode is likely activated. Adjust the mode to enable automatic operation.
How to turn on the night light on a DURAVIT Plumbing Product?
If the night light on your DURAVIT Plumbing Product isn't lighting up, it might be deactivated. Try activating the night light.
General| Product Type | Concealed Cistern |
|---|---|
| Height | 1120 mm |
| Installation Type | Wall-Mounted |
| Flush Type | Dual Flush |
| Flush Volume | 3/6 liters |
| Rim Type | Rimless |
| Water Connection | 1/2 inch |
| Application | WC |
Visual guide to the actuator plate components and layout.
Explains the meaning of different LED colors on the actuator plate.
Explains LED behavior related to presence detection modes.
Defines important terms and symbols used in the manual.
Introduces general safety guidelines and the product's intended purpose.
Highlights dangers of electric shock and risks from improper product handling.
Provides crucial safety instructions for battery use and storage.
Step-by-step guide for the initial setup of the actuator plate.
Explains the fundamental principles of touch-free activation.
Instructions for performing long and short flushes.
Guide on how to modify flush water volume using the remote.
How to activate or deactivate the automatic flushing feature.
Procedure to manually drain the cistern if needed.
Activating, deactivating, and setting the hygiene flush function.
How to manually trigger a flush in emergency situations.
How to manually start or stop the odour extraction.
Activating and deactivating the automatic odour extraction feature.
Adjusting the duration the fan runs after flushing.
Adjusting the intensity of the odour extraction fan.
Temporarily locking buttons for cleaning purposes.
Managing the automatic night light feature.
Enabling and disabling the child safety lock mechanism.
Procedure to restore all settings to default.
Customizing presence detection ranges in normal mode.
Configuring presence detection specifically for small room environments.
How the unit operates during power outages.
Step-by-step instructions for replacing the battery.
Steps to detach the actuator plate for maintenance.
Procedures for disconnecting cables and removing the mounting frame.
Detailed steps for releasing the battery compartment and swapping batteries.
Reconnecting the battery compartment and managing cables.
Installing the threaded rod for manual flush mechanism.
Steps for putting back the protective plates and mounting frame.
Reconnecting the electrical wiring to the actuator plate.
Final step of attaching the actuator plate to the frame.
How to properly clean the actuator plate surface.
Instructions for disposing of electronic equipment, batteries, and packaging.
Diagnosing issues based on actuator plate LED indicator behavior.
Resolving common problems related to the actuator plate's general operation.
Solutions for issues with the flushing mechanism.
Addressing problems with the hygiene flush feature.
Diagnosing and fixing issues with the odour extraction system.
Resolving problems related to the night light feature.
Information found on the product's identification label.
Electrical, operating temperature, and protection ratings.
Information on the types of batteries used.
