–
Scaler tool kit P1
30 µm, straight, for the removal of subgingival
deposits with a pocket depth of up to 4 mm
–
Scaler tool kit P2
60 µm curved right, for the removal of subgin-
gival deposits
–
Scaler tool kit P3
60 µm curved left, for the removal of subgingi-
val deposits
–
Scaler tool kit P4
120 µm, for supragingival removal of coatings
on smooth surfaces and for interdental areas
9.3 Steri-box
Scaler steri-box (cover: blue)
All parts which can be sterilised are optimally
stored in the special Vector Scaler steri-box.
For steam sterilisation the steri-boxes are placed
in the small steam steriliser, "13 Reprocessing".
If sterile storage is required, wrap the steri-box in
suitable sterilisation packaging in accordance
with DIN11607-1 and seal.
The rubber clips on the carrier plate can be
replaced if necessary.
9.4 Flexible foot switch
The handpieces are operated with the flexible
foot switch.
In wireless operation the flexible foot switch is
supplied with voltage from a battery. If the battery
power starts to fail, the orange PEDAL LED on
the unit lights up.
Interference can occur in wireless opera-
tion if the battery power is low, so it is
important to change the batteries in good
time.
The service life of the battery is around 1 year or
approx. 900 treatments.
If the battery is empty or not present then the
flexible foot switch can be connected with a
cable to the unit so that the treatment can be
continued. The battery can then be inserted later
on.
Changing the battery – "15.4 Inserting or chang-
ing the battery in the flexible foot switch".
Usage
20 9000-615-32/02 2012V003
EN
To Next Page
Loading...
