12 CA 251 O251-1EN1
BEFORE START
Remember to carry out daily service, see Maintenance
manual.
Set the battery disconnecter (1) to its ON mode.
Battery disconnecter -
Switching on
1
Fig. 8 Operator’s seat
1. Lever - length adjustment
2. Lever - back slope
3. Lever - weight adjustment
4. Knob - lumbar adjustment
5. Knob - seat slope
Comfort seat (Cab) - Setting
3
2
1
Operator’s seat - Setting
Position the operator’s seat so that the controls are
easily accessible.
The seat can be adjusted as follows:
•
Length adjustment (1)
•
Back slope (2)
•
Cushioning in relation to the operator’s weight (3)
Ensure that the battery box is always
closed while driving.
Fig. 7 Operator’s seat
1. Lever - length adjustment
2. Knob - back slope
3. Lever - seat cushioning
Fig. 6 Battery box
1. Battery disconnecter
Set the operator’s seat in a comfortable position and
so that the controls are easily accessible.
The seat has the following adjustment facilities:
•
Length adjustment (1)
•
Back slope (2)
•
Weight adjustment (3)
•
Lumbar support (4)
•
Seat slope (5)
1
3
2
4
5
To Next Page
Loading...
