24 CA 251 O251-1EN1
OPERATING INSTRUCTIONS – SUMMARY
1. Follow the SAFETY INSTRUCTIONS in the Safety Manual.
2. Ensure that all instructions in the MAINTENANCE MANUAL are followed.
3. Turn the battery disconnecter to ON.
4. Move the forward/reverse lever to NEUTRAL.
5. Set the amplitude selector to O.
6. Set the revs control to the idling mode.
7. Start the engine and allow it to warm up.
8. Set the gear selector to the WORKING SPEED mode (
).
9. PULL OUT the parking brake knob.
10. DRIVE the roller. Operate the forward/reverse controls with care.
11. Test the brakes.
12. Use the vibration only when the roller is in motion.
13. Check watering of the drum(s) where applicable.
14. IN AN EMERGENCY: - Press the reserve brake knob.
- Grip the steering wheel firmly.
- Be prepared for a sudden stop.
15. Parking: - Stop the engine and chock the drum and wheels.
16. Towing: - See the operation manual.
17. Lifting: - See the operation manual.
18. Transport: - See the operation manual.
To Previous Page
Loading...
