14 CA 251 O251-1EN1
BEFORE START (Contd.)
Strike-off blade
(optional equipment)
Fig. 12b Strike-off blade
1. Locking pin
Always ensure that the strike-off blade is
secured by the locking pin (1) when dri-
ving with the blade in its raised position.
Always lower the blade to the ground
before leaving/parking the roller.
1
Operator’s station
Fasten the seat belt provided if ROPS or a cab is
fitted on the roller and wear a protective helmet.
Always replace the seat belt with a new
one if it is worn or has been subjected to a
heavy load.
Check that the rubber elements on the
platform are intact. Worn elements will impair
comfort.
Ensure that the anti-slip on the platform is in
good condition; replace with new anti-slip if
friction is poor.
Fig. 12a Operator’s station
1. Seat belt
2. Rubber element
3. Anti-slip
13 2
To Next Page
Loading...
