29CA 251/301 M251EN2
EVERY 2000 HOURS OF OPERATION (Yearly)
Water tank (CA 251A)
- Draining, Cleaning
Emulsion tank (CA 251A)
- Draining, Cleaning
Beware of the risk of freezing in the winter.
Drain the tank, pump and piping.
1. Remove the drain plug (1) and drain off the water.
2. Clean the inside of the tank with water and a
suitable detergent for plastic material.
3. Refit the plug and check tightness.
The water tank is made of plastic (polythene)
and is recyclable.
CAUTION
Fig. 52 Water tank
1. Drain plug
1
Fig. 54 Pump system
1. Water filter
1
The emulsion tank is drained most easily by screwing
off the water filter (1).
The emulsion tank is made of plastic
(polythene) and is recyclable.
1 2 3
Fig. 53 Pump system
1. Water pump
2. Stop cock
Water pump (CA 251A)
- Draining
Drain the water pump (1) via the stop cock (2).
To Next Page
Loading...
