Dynapac CC1200C - Steering Joint Check

105 pages

Save Page as PDF

To Next Page

To Previous Page

Maintenance - 2000h

ICC1200C-1EN3.pdf2012-05-16

Steering joint - Check

Fig. Steering joint

Check the steering joint for any damage or cracks.

Check and tighten any loose bolts.

Check also for any stiffness and play.

Main Page

Table of Contents3
Introduction9
Warning Symbols9
The Machine9
Intended Use9
Safety Information9
General10
CE Marking and Declaration of Conformity11
Safety - General Instructions13
Safety - When Operating15
Driving Near Edges15
Slopes16
Special Instructions17
Standard Lubricants and Other Recommended Oils and Fluids17
Higher Ambient Temperatures, above +40°C (104°F)17
Lower Ambient Temperature - Freeze Risk17
Temperatures17
High Pressure Cleaning17
Fire Fighting18
Roll over Protective Structure (ROPS)18
Battery Handling18
Jump Starting19
Technical Specifications21
Vibrations - Operator Station21
Noise Level21
Dimensions, Top View22
Dimensions, Side View23
Weights and Volumes24
Working Capacity24
General24
Tightening Torque26
- ROPS - Bolts27
- Hydraulic System27
Machine Description29
- Identification29
- Instruments/Controls36
- Electrical System41
  - Fuses41
Operation43
- Before Starting43
- Starting47
  - Starting the Engine47
- Driving49
  - Operating the Roller49
  - Interlock/Emergency Stop/Parking Brake - Check50
- Vibration50
  - Manual/Automatic Vibration50
- Braking51
- Parking52
  - Chocking the Wheels/Drum52
  - Battery Disconnector53
Long-Term Parking55
- Engine55
- Battery55
- Air Cleaner, Exhaust Pipe55
- Fuel Tank55
- Hydraulic Reservoir55
- Water Tank55
- Steering Cylinder, Hinges, Etc56
- Hoods, Tarpaulin56
Miscellaneous57
- Lifting57
- Towing/Recovering59
Operating Instructions - Summary65
Preventive Maintenance67
Acceptance and Delivery Inspection67
Warranty67
Maintenance - Lubricants and Symbols69
Maintenance Symbols70
Maintenance - Maintenance Schedule71
General71
Service and Maintenance Points71
Every 10 Hours of Operation (Daily)72
After the FIRST 50 Hours of Operation72
Every 50 Hours of Operation (Weekly)73
Every 250 Hours of Operation (Monthly)73
Every 500 Hours of Operation (Every Three Months)73
Every 1000 Hours of Operation (Every Six Months)74
Every 2000 Hours of Operation (Yearly)74
Maintenance, 10H75
Check - Coolant System75
Hydraulic Reservoir, Level Check - Filling76
Lowering of Engine Hood77
Air Circulation - Check77
Fuel Tank - Filling78
Sprinkler System/Drum Checking - Cleaning78
Sprinkler System / Wheels Check - Cleaning79
Water Tank - Filling80
Scrapers, Fixed Checking - Setting80
Scrapers, Spring-Action (Optional) Checking - Adjustment80
Scrapers Check - Adjustment81
Brakes - Check81
Pump System / Tire Check - Cleaning82
Maintenance - 50H83
Air Cleaner Indicator83
Air Cleaner83
Check - Replacement of Main Filter83
Air Filter Indicator - Resetting84
Backup Filter - Change84
Air Cleaner - Cleaning85
Steering Cylinder and Steering Joint - Lubrication85
Tires - Tire Pressure86
Maintenance - 250H87
Coolers87
Checking - Cleaning87
Battery - Check Condition88
Engine Oil and Oil Filter - Change89
Maintenance - 500H91
Drum - Oil Level Inspection - Filling91
Rubber Elements and Attachment Screws Check92
Hydraulic Reservoir Cap - Check92
Controls - Lubrication92
Check - Coolant System93
Maintenance - 1000H95
Replacing the Hydraulic Oil Filter95
Hydraulic Fluid Reservoir - Draining97
Replacing the Fuel Filter97
Replacing the Pre-Filter98
Maintenance - 2000H99
Hydraulic Tank - Changing the Fluid99
Drum - Oil Change100
Water Tank - Draining100
Water Pump - Draining101
Water Tank - Cleaning101
Emulsion Tank - Draining102
Fuel Tank - Cleaning102
Steering Joint - Check103

Dynapac CC1200C - Steering Joint Check

Table of Contents

Related product manuals