Dynapac CC1200C - Every 50 Hours of Operation (Weekly); Every 250 Hours of Operation (Monthly); Every 500 Hours of Operation (Quarterly)

Maintenance - Maintenance schedule
ICC1200C-1EN3.pdf2012-05-16
Every 50 hours of operation (Weekly)
See Contents to find the page numbers of the sections
referred to!
Pos.
in fig
Action CommentPos.
in fig
Action Comment
4 Check indicator for air cleaner
Check that the air hoses are in good condition and
that the connections are tight
Optional4 Check indicator for air cleaner
Check that the air hoses are in good condition and
that the connections are tight
Optional
15 Grease the steering joint15 Grease the steering joint
16 Grease the steering cylinder brackets16 Grease the steering cylinder brackets
20 Check the tire pressure20 Check the tire pressure
Every 250 hours of operation (Monthly)
See Contents to find the page number of the sections
referred to!
Pos.
in fig
Action CommentPos.
in fig
Action Comment
3 Clean the outside of the radiator core In duty environments, as
necessary
3 Clean the outside of the radiator core In duty environments, as
necessary
5 Check the battery condition5 Check the battery condition
6 Change the engine oil and oil filter Refer to the engine manual6 Change the engine oil and oil filter Refer to the engine manual
Every 500 hours of operation (Every three
months)
See Contents to find the page number of the sections
referred to!
Pos.
in fig
Action CommentPos.
in fig
Action Comment
18 Check the oil level in the drum18 Check the oil level in the drum
10 Check rubber elements and bolted joints10 Check rubber elements and bolted joints
11 Check the hydraulic reservoir cover/breather11 Check the hydraulic reservoir cover/breather
6 Lubricate hinges and controls6 Lubricate hinges and controls
6 Check engine's V-belt Refer to the engine manual6 Check engine's V-belt Refer to the engine manual
3 Check coolant freezing point. Change the coolant
every other year
3 Check coolant freezing point. Change the coolant
every other year
65