Maintenance - 2000h
ICC1200C-1EN3.pdf2012-05-16
Maintenance - 2000h
Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
Ensue that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
Ensue that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
Hydraulic tank - Changing the fluid
Fig. Left frame side
1. Drain plug
1
Risk of burn injuries when draining hot oil. Protect
your hands.
Risk of burn injuries when draining hot oil. Protect
your hands.
Place a container under the plug. It should hold at
least 50 liters. Save the oil and dispose of it in an
approved manner.
Place a container under the plug. It should hold at
least 50 liters. Save the oil and dispose of it in an
approved manner.
Unscrew the drain plug (1) and allow all the oil to run
out. Wipe and replace the drain plug.
Fill with fresh hydraulic fluid of the grade
indicated in the Lubricant specification.
Fill with fresh hydraulic fluid of the grade
indicated in the Lubricant specification.
Replace the hydraulic fluid filter. See under the
heading 'Every 1000 hours of operation'.
Start the diesel engine and run the various hydraulic
functions. Check the fluid level in the tank, and top up
if necessary.
91
To Next Page
Loading...
