27
CC 102/C/122/C/132/142/C O102EN3
1. Follow the SAFETY INSTRUCTIONS in the Safety Manual.
2. Make sure that all instructions in the MAINTENANCE MANUAL are followed.
3. Turn the battery disconnecter to ON.
4. Put the forward/reverse lever in NEUTRAL.
5. Set the vibration selector for Manual/Automatic to position 0.
6. Set the rev control to idling mode.
7. Start the engine and let it warm up.
8. Set the rev control to working mode.
9. Position the reserve/parking brake knob in pulled-up mode.
10. Drive the roller. Operate the forward/reverse lever with care.
11. Test the brakes.
Remember that the braking distance will be longer if the roller is cold.
12. Use vibration only when the roller is in motion.
13. Make sure that the drums are watered sufficiently when needed..
14. IN AN EMERGENCY: – Push the RESERVE/PARKING BRAKE KNOB.
– Hold the steering wheel firmly.
– Brace yourself for a sudden stop.
15. Parking: Push the reserve/parking brake knob.
Stop the engine and chock the drums.
16. Lifting: – See the OPERATION MANUAL.
17. Towing: – See the OPERATION MANUAL.
18. Transport: – See the OPERATION MANUAL.
19. Salvaging: – See the OPERATION MANUAL.
OPERATING INSTRUCTIONS – SUMMARY
To Previous Page
Loading...
Need help?
General
