Reservation for changes.
Printed in Sweden.
The CC 102/122 and CC 132 are specially designed for repair work on asphalt compounds, but
can also be used for paving small streets, sidewalks and bicycle trails. They are often used as a
complement to bigger rollers for compacting cross-joints and restricted spaces.
The CC 102C and CC 122C are small, light combo rollers that are used for compacting thin layers
and soft asphalt compounds.
The CC 142 is a typical ”town roller” for compacting asphalt compounds on streets, parking lots
and industrial sites. The capacity for this type of work is adequate for following a smaller-size
surface finisher.
The CC 142C is also intended for minor paving jobs on low-traffic asphalt areas where a level and
attractive surface structure is desired. Typical workplaces—in addition to sidewalks and bicycle
trails—are therefore parks, golf courses and sports fields.
Vibratory roller
CC102/102C, CC122/122C
CC132, CC142/142C
KEEP THIS MANUAL
AVAILABLE FOR
FUTURE USE
Operation
O102EN3, December 2001
Diesel engine:
CC 102/C/122/C/132 Deutz F2L 1011F, Isuzu 3 LD1PW-05
CC 132/142/C Deutz F3L 1011F
These instructions apply from:
CC 102/C/122/C
Deutz PIN (S/N) *60110102*
Isuzu (-II) PIN (S/N) *60220102*
CC 132 PIN (S/N) *60230912*
CC 142/C
Deutz PIN (S/N) *60210142*
To Next Page
Loading...
Need help?
General
