dynasonics TFXL series User Manual

Series TFXL
Transit Time Ultrasonic Flow Meter
Remote Mount System
Operations & Maintenance
Manual
REV 01/11

dynasonics TFXL series Specifications

General

Brand	dynasonics
Model	TFXL series
Category	Measuring Instruments
Language	English

Summary

QUICK-START OPERATING INSTRUCTIONS

TRANSDUCER LOCATION

Guidance on selecting the optimal mounting location for transducers.

PART 1 - INTRODUCTION

PART 1 - SPECIFICATIONS

PART 1 - TRANSMITTER INSTALLATION

Transducer Connections

Step-by-step guide for connecting transducer cables to the transmitter.

Transmitter Power Connections

Details on connecting the DC power supply to the transmitter.

PART 1 - INPUT/OUTPUT CONFIGURATION

Connecting the 4-20 mA Output

Instructions for configuring and connecting the 4-20 mA current output.

Connecting the Pulse Output

Guide for configuring and connecting the pulse output waveform.

PART 1 - STARTUP AND CONFIGURATION

Before Starting the Instrument

Instrument Startup

PART 2 - TRANSDUCER INSTALLATION

Mounting Location

Criteria for selecting an optimal location for transducer mounting.

Transducer Spacing

Transducer Mounting

DTTN V-Mount and W-Mount Transducer Installation

DTTH High Temperature Transducers

DTTS and DTTC Small Pipe Transducer Installation

DTTN Z-Mount Transducer Installation

Mounting Rail Installation

PART 3 - PROGRAMMING

Initialization

Pipe and Liquid Configuration

Setting up flow range, liquid, and pipe parameters via BASIC tab.

Flow Units Configuration

Configuring flow rate and totalizer units in the FLOW tab.

Meter Filter Configuration

Output Configuration

Setting range factors for 4-20 mA and frequency outputs.

Display Configuration

Flow Meter Calibration

Using ULTRALINK for multi-point calibration routine.

TFX Error Codes