Need help?Do you have a question about the dynasonics Badger Meter IS-6000 Doppler and is the answer not in the manual?
General| Technology | Doppler |
|---|---|
| Enclosure | NEMA 4X (IP66) |
| Measurement Principle | Doppler Effect |
| Application | Liquids with suspended solids or aerated liquids |
| Accuracy | ±2% of reading |
| Pipe Size Range | 0.5 inch and up |
| Fluid Compatibility | Liquids with bubbles |
| Output | 4-20 mA |
| Power Supply | 100-240 VAC |
| Operating Temperature | -40°C to 60°C (-40°F to 140°F) |
| Sensor Material | Stainless Steel |
| Communication | Modbus |
| Type | Ultrasonic Doppler Flow Meter |
Explains hazard symbols (Danger, Warning, Caution) and important notes.
Defines qualified personnel roles for installation, operation, and maintenance.
Specifies the designed purposes and operational limitations of the flow meter.
Details crucial safety measures for electrical connections, grounding, and voltage.
Lists all components and optional accessories included with the IS-6000 Doppler.
Overview of transmitter, sensors, and measurement capabilities.
Explains the browser-based user interface, features, and system requirements.
Criteria for selecting an optimal and stable site for device installation.
Step-by-step guide for securely mounting the transmitter unit.
Recommendation and procedure for calibrating the measuring system for accuracy.
Details on accessing and wiring the device's terminal compartment safely.
Comprehensive pinout details for power, relays, I/Os, and sensors.
Instructions for properly connecting various sensors to the transmitter.
Essential pre-power-up checks for electrical integrity.
Overview of the transmitter's physical interface and display functions.
Steps to establish and use WiFi connectivity for device access.
Instructions for connecting and communicating via Ethernet.
Procedure for accessing the user interface with credentials.
Navigation overview of the user interface's main menus and submenus.
Options for graphical display and analysis of measurement data.
Core configuration settings for measurement parameters.
Defining cross-section shapes and dimensions for accurate flow calculation.
Configuration for water level measurement methods.
Setting limits for velocity and discharge for plausibility checks.
Configuration of I/O ports for data exchange.
Settings for network communication and data transfer.
Configuring LAN or GSM network parameters.
Tools for system diagnostics and error checking.
Additional settings for display and system configuration.
Functions for configuration backup, restore, and software updates.
Guidelines for cleaning and routine maintenance of the device.
Procedures and information for resolving system issues.
List of error codes, their descriptions, and recommended handling.
Steps to restore the device to its default factory configuration.
Instructions for returning the device for repair or inspection.
Explains the fundamental Doppler effect for flow measurement.
How to evaluate ultrasonic signals for measurement accuracy.
Specifications for the IS-6000 Doppler transmitter unit.
Technical specifications for the area velocity sensor.
Tables of Manning and Strickler coefficients for various channel materials.
List of references and sources used in the manual.
To Next Page
