dynasonics Badger Meter IS-6000 Doppler - Home - Overview

7.4. Home - Overview
 Home - Overview
 Overview
General information on measuring system and status.
 Overview
Parameter Setting Description
System
Type Display name of connected measuring system.
S/N
Display of serial number of measuring system;
automatically assigned.
Site name
Display name measuring site.
Name entry field under  Extras  Language Location.
System time Display system time
Version
Current version numbers of hard- and software
fm: version flow meter
ui: version GUI (user interface).
Measurement
Flow Display of current value discharge.
Water level Display of current water level.
Volume Display of current value total volume.
Signal Display of current signal value.
T (combisensor) Display of current water temperature
H (combisensor) Display of current water level value
Status
Status Display device status.
Error
Display of date, time, error codes (binary code) and error description.
Note that on the transmitter LCD the specific error code will not be displayed. Error
message displayed on transmitter: ERROR. Refer to user interface for error code.
Programming
Page 33 March 2021 HYB-UM-03155-EN-03