dynasonics Badger Meter IS-6000 Doppler User Manual

7.10.1. Network
Specification of network type (LAN or GSM/WLAN) and basic network settings.
Network:
 LAN
GSM
> Select network type from drop-down list.
 LAN
Setting Description
DHCP   Enable /  disable DHCP
>  DHCP (Dynamic Host Configuration Protocol) enabled.
(factory setting)
DHCP is activated and the IP address, Subnet and Gateway are automatically assigned by the
server.
IP Display IP address (automatically assigned).
Subnet Display subnet mask (automatically assigned).
Gateway Display gateway address (automatically assigned).
 Click LAN to confirm entry.
Programming
Page 77 March 2021 HYB-UM-03155-EN-03

dynasonics Badger Meter IS-6000 Doppler Specifications

General

Brand	dynasonics
Model	Badger Meter IS-6000 Doppler
Category	Measuring Instruments
Language	English