dynasonics Badger Meter IS-6000 Doppler - Measurement Range

7.7.3. Measurement Range
Settings for discharge calculation.
 Measurement Range / Discharge calculation
Setting Description
Limits Range
V min
V max
> Enter minimum and / or maximum for velocity value V for plausibility check.
If no range is set, all V-values of the measurement are
used for Q calculation.
V- values from 30 cm/s are used for Q calculation.
(V > 30 cm/s)
V-values lower than 1000 cm/s are used for Q calculation.
(V < 1000 cm/s)
V-values > 30cm/s and < 1200 cm/ are used for Q
calculation. (30 cm/s < V < 1200 cm/s)
Programming
Page 51 March 2021 HYB-UM-03155-EN-03