7.9.2. Units
Free user defined setting of units for the following parameters: discharge (Q)
• velocity (v)
• length (l)
• area (A)
• time (t)
• voltage (U)
• temperature (T)
• signal
• volume (V)
• concentration
Conversion factors of common measurement units are already specified. New units can be defined and added by the user.
Units
Definition of displayed unit for listed parameter.
Setting Description
Discharge reference unit: m
3
/s (cubic meters per second)
available units: l/s
m³/h
Mld
Gps
Gpm
Gph
Gpd
MGpd
(liter per second)
(cubic meters per hour)
(million liters per day)
(US gallons per second)
(US gallons per minute)
(US gallons per hour)
(US gallons per day)
(million US gallons per day)
Velocity reference unit: m/s (meter per second)
available units: km/h
feet/s
cm/s
(kilometer per hour)
(feet per second)
(centimeter per second)
Length reference unit: m (meter)
available units: ft
km
mm
cm
(feet)
(kilometer)
(millimeter)
(centimeter)
Programming
Page 72 March 2021HYB-UM-03155-EN-03
To Next Page
Loading...
Need help?
General
