FTP
Setting Description
Measurement 1:
Measurement
Value:
None
A
H
(…)
Specify measured values (Measurement 1) for data transfer.
> Select measured values / parameters from drop-down list;
corresponding units are displayed.
(Explanation of abbreviations see 7.13)
Unit
Display of corresponding units.
> Click + to add row for additional measurement value or – to delete values.
Click Apply to save entries.
7.10.4. Modbus
Modbus is a client-server communication protocol used for communication between electronic devices to exchange data
mainly in the industrial environment.
A Modbus RTU interface (RS485/RS232) or an Ethernet interface with Modbus TCP protocol are available for communication.
Programming
Page 87 March 2021 HYB-UM-03155-EN-03
To Next Page
Loading...
Need help?
General
