dynasonics Badger Meter IS-6000 Doppler - Users Values; Settings - Data Logging and Display

7.8.5. Users Values
Definition of user defined measurement parameters for the connection of max. 4 additional sensors.
 Users values
Setting Description
1. Measurement
parameter
> Enter measurement parameter and corresponding unit of additional connected sensor.
2. Measurement
parameter
> Enter measurement parameter and corresponding unit of additional connected sensor.
3. Measurement
parameter
> Enter measurement parameter and corresponding unit of additional connected sensor.
4. Measurement
parameter
> Enter measurement parameter and corresponding unit of additional connected sensor.
 Click Apply to save settings.
7.9. Settings – Data Logging and Display
 Settings
 Logging  Units  Displayed Units  Totalizer
Settings for data logging and log-file logging, settings for displayed units, user defined units,
settings for totalizer.
Programming
Page 70 March 2021HYB-UM-03155-EN-03