6.3. Communication to the Transmitter via Ethernet LAN
Use RJ45 cable to connect transmitter with your PC.
Then establish connection corresponding to individual network settings or ask your network administrator for assistance.
Default setting: Automatic assignment of the IP address via DHCP.
The corresponding IP address is displayed on the transmitter display under LAN.
Manual IP address assignment (without DHCP): If a static IP address, subnet mask and default gateway are required, the
parameters can be assigned manually by deactivating DHCP and enter new IP address and network parameters.
The settings are changed in GUI in the main menu Communication under Network LAN.
Communication with Transmitter
Page 27 March 2021 HYB-UM-03155-EN-03
To Next Page
Loading...
Need help?
General
