8.3. Return / Repair
Please follow the following instructions in case the device has to be returned to the manufacturer for repair or inspection.
For returning the device proceed as follows:
• Request “Flow Meter Instrument Return Form” (IRF) by email from the manufacturer.
• Fill in one sheet per returned instrument. This will help us to get the information needed to carry out the repair as soon as
possible.
• Include the completed and signed IFR with your return shipment.
• Clean and decontaminate the device properly.
• Pack it safely by ideally using the original packing.
• Send the parcel to the manufacturer for repair
MPORTANTI
Keep original packaging for safe storage and safe transport.
DECONTAMINATION NOTE
BECAUSE OF LEGAL REGULATIONS ON ENVIRONMENTAL PROTECTION AND FOR THE SAFETY AND HEALTH OF OUR
EMPLOYEES, ONLY SEND BACK CLEAN AND DECONTAMINATED DEVICES. IF THE DEVICE HAS BEEN OPERATED WITH
TOXIC, FLAMMABLE OR WATERENDANGERING PRODUCTS CHECK AND MAKE SURE, IF NECESSARY, BY RINSING OR
NEUTRALIZING, THAT ALL CAVITIES ARE FREE FROM SUCH DANGEROUS SUBSTANCES. THE MANUFACTURER RESERVES
THE RIGHT TO REFUSE THE DELIVERY OF DIRTY OR CONTAMINATED DEVICES OR, IF NECESSARY, CHARGE EXTRA
CLEANING COSTS. SIGN THE IRF INSTRUMENT RETURN FORM TO CONFIRM THAT THE DEVICE IS SAFE TO HANDLE.
8.4. Disposal
DISCONNECT POWER BEFORE DISMOUNTING THE DEVICE.
RISK OF POTENTIAL HAZARD TO HUMANS AND ENVIRONMENT DUE TO HARMFUL SUBSTANCES. MAKE SURE, THAT THE
DEVICE AND SENSORS ARE FREE FROM HARMFUL SUBSTANCES.
MPORTANTI
Dispose the device in compliance with your country’s legal and valid regulations for the disposal of electronic and electrical
appliances. Correct disposal avoids negative effects on public health and the environment and makes sure recycling of useful
raw materials.
This symbol indicates that the directive 2009/96 EG on waste and electronic equipment requirements shall be observed on the
disposal of the device.
Service
Page 104 March 2021HYB-UM-03155-EN-03
To Next Page
Loading...
Need help?
General
