Dynatronics Dynatron 850 Plus - Soundheads and Probes; Accessories

Dynatron® 850plus & 550plus
Installation & Features
6
Soundheads and Probes
The Dynatron 850plus may be purchased with one or more applicator soundheads in the
following sizes:
Part No. Size Frequencies
SH01CM 1 cm
2
Operates at 2 and 3 MHz
CM02SH 2 cm
2
Operates at 1, 2, and 3 MHz
CM05SH 5 cm
2
Operates at 1, 2, and 3 MHz
CM10SH 10 cm
2
Operates at 1, 2, and 3 MHz
An optional high volt probe or microcurrent probe may also be purchased for use with this
device. Contact your Dynatronics dealer to order optional accessories
Accessories
The following optional and replacement accessories may be purchased from Dynatronics or
from your Dynatronics dealer:
Part No. Description
8E0026 High volt probe (requires one or more applicators)
8E0017 High volt applicator 2” round
8E0018 High volt applicator 5/8” round
8E0019 High volt applicator 2”x1-1/2”
8D0007 Microcurrent active probe
8D0027 Microcurrent ground probe
7B0208/ 7B0209 2” diameter carbon electrodes (red and gray)
7B0063/ 7B0065 3” diameter carbon electrodes (red and gray)
7B0059/ 7B0061 3” x 5” carbon electrodes (red and gray)
7B0067/ 7B0069 1.5” x 2.0” carbon electrodes (red and gray)
7B0003/ 7B0203 1.75” x 3.75” adhesive electrodes (with snap or pin connector)
7B0005/ 7B0204 1.75” square adhesive electrodes (with snap or pin connector)
7B0205 1.25 round adhesive electrodes (with pin connector)
7B0206 2” round adhesive electrodes (with pin connector)
7B0207 3” round adhesive electrodes (with pin connector)
7B0139 120” lead (black)
7B0141 120” lead (red)
7B0077 Bifurcated extension lead wire
7B0081 Banana-to-pin adapter
7B0001 Snap adapter
7B0161/ 5LTRGEL Ultrasound coupling gel (8 oz.bottle or 5 liter container)