Dynatron® 850plus & 550plus
Treatment Instructions - COMBINATION
61
Combination Default Settings
The factory default for a combination treatment is an ultrasound treatment with a
premodulated treatment and the respective default settings for those two modalities.
If you save defaults during a Combo treatment the following settings are saved:
• The stim modality that is selected for the current combo treatment is saved as the default
stim treatment for combo.
• Stim parameters for this setup are saved, and become the default settings for that stim
modality both during combo and during separate treatments.
• Ultrasound parameters for this setup are saved, and become the default ultrasound
settings for combination treatments only (non-combination ultrasound treatments may
have different default settings).
• The treatment time is saved as the default treatment time for combination treatments.
To Next Page
Loading...
