Tower ESS User Manual
4
©Dyness reserves the copyright of this document.
1 Introduction
Brief Introduction
Tower is a high voltage battery energy storage system based on lithium iron phosphate
batteries, and it is one of the new products developed and produced by Dyness. They are
used to provide reliable power for various types of equipment and systems. Tower is
especially suitable for high power, limited installation space, restricted load-bearing and
long cycle life.
Product Properties
The entire module is non-toxic, non-polluting and environment-friendly.
The anode material is made from LiFePO4 with high security and long cycle life.
The Battery Management System (BMS) comes with protective functions including
over-discharge, over-charge, over-current and high/low temperature.
The system automatically manages charging and discharging and balances current and
voltage of each cell.
Flexible configuration, multiple battery modules can be connected in series for expanding
voltage and capacity.
The adopted self-cooling mode rapidly reduces the system noise.
The module has less self-consumption, does not need to be charged up to 6 months; no
memory effect, excellent performance of shallow charging and discharging.
The operating temperature range is 0 to +50°C, with excellent discharging performance
and cycle life.
Small size and light weight, easy installation and maintenance of standard module.
Symbol Definition
Figure 1-1 Battery energy storage system nameplate
To Next Page
Loading...
