EN
ENTER 40
14
Notice
Module and smart card are not including in the packaging.
Install the CI+ module after the channel scan has been accomplished and all
other settings have been set.
The activation of the card may take several minutes for the first time it is used.
When necessary, the device will check the module every time the device is
switched on.
Pay close attention to the manual of the CI+ module and smart card.
Notice to CI+
Please note that the recording and time shift function may be limited on some
channels.
Recorded files of channels, which are encrypted by the CI+ card are only
workable on this device.
These limitations are determined by the broadcaster. The manufacturer takes
no responsibility.
To Next Page
Loading...
