Dyon ENTER 40 - CI Information

EN
ENTER 40
34
6.5 CI information
The TV set contains a Common Interface CI+ Slot.
Different CAM cards with smart card reader can be found at local dealers for
different Pay-TV provider.
• Set in: Turn off the TV. Now insert the module.
• Remove: Turn off the TV. Now just unplug the module.
If a Module is set in some more options are available at the CI Information page
of the OSD.
1. Press the menu key to open the system settings.
2. Us the arrow keys to select CI Information and press OK to open the
settings.
Wait until the sub menu is leaded..
3. Use the arrow keys to select an option and press OK to change or open the
selected function.
4. Press EXIT to store the changes and exit the menu.
C
erta
i
n menu opt
i
ons an
d
sett
i
ngs are
d
epen
d
upon t
h
e
corresponding CA module.
The CA module (not included) is necessary when using a smart
card (not included) to receive encrypted stations. Please insure
that the CA module and smart card are compatible with each
other. This device may use CI+ compatible modules. Which free
to air stations and contents are available depends on the
used CA Module and Smart Card. Please note that not all service
contractors offer the essential CAM module required or
may offer various other modules which may not be compatible.
Please refer to you local dealer or contact the Hotline for more
information concerning compatibility.