EN
DYON LIVE
18
4.5 Connecting to TV-Signal Input
Connect the TV signal cable (the antenna cable, for example) to the Antenna Input Jack on
the back of the unit so that you can receive television programmes.
After connection, turn on the power of the unit. Then press the SOURCE button to select
TV or DTV mode and conduct program selection.
Note
Whether and how many DVB-T channels can be received by this device, is
strongly depending on the operational place, and the DVB-T signal strength in
this Area.
DVB-T radio in particular is very limited and not available in most locations.
Please note that for using of DVB-T after each larger local changes, a new
channel search should be accomplished. Since the frequency of the channels
may vary from region to region.
To Next Page
Loading...
