EN
DYON LIVE
44
6.3 CI Information
The TV set contains a Common Interface CI+ Slot.
Different CAM cards with smart card reader can be found at local dealers for different Pay-
TV provider.
• Set in: Turn off the TV. Now insert the module.
• Remove: Turn off the TV. Now just unplug the module.
If a Module is set in some more options are available at the CI Information page of the
OSD.
1. Press the menu key to open the system settings.
2. Use the arrow keys to select CI Information and press OK to open the settings.
Wait until the sub menu is leaded.
3. Use the arrow keys to select an option and press OK to change or open the selected
function.
4. Press EXIT to store the changes and exit the menu.
Certain menu options and settings are depend upon the corresponding
CA module.
The CA module (not included) is necessary when using a smart card (not
included) to receive encrypted stations. Please insure that the CA module
and smart card are compatible with each other. This device may use CI+
compatible modules. Which free to air stations and contents are available
depends on the used CA Module and Smart Card. Please note that not all
service contractors offer the essential CAM module required or
may offer various other modules which may not be compatible. Please
refer to you local dealer or contact the Hotline for more information
concerning compatibility.
To Next Page
Loading...
