E Instruments 4400 User Manual

31
@IST01530EEJ 019175A0 190411
4.11 Print Menu
This menu is used to access the following print and check configurations:
Print analysis report:
Shows the details of the selected ticket type and allows to start printing.
Configure Print:
Allows to set the number of printed copies and layout of the ticket. The ticket layout selection is only valid for
combustion analysis and can be chosen among Complete, Partial and Total. Tickets for draft, smoke, ambient
gas concentration and tightness test only allow a specific layout. Layouts for combustion analysis are specified
as described in the following:
Full: includes a header with company data as well operator data previously programmed in the configuration
menu, measurements sampled in the combustion analysis and, when sampled, the draft, smoke and
CO - NO ambient gas values.
Partial: only reports the combustion analysis measurement values and information, without any header,
comments or blank lines for operator comments.
Total: is arranged with the complete layout of the average analysis followed by the single analysis
measurements report.
Advance paper:
Feeds paper in the printer; this function is most useful when replacing the paper roll in the printer.
Trial print:
Prints a graphical/alphanumeric test ticket for a complete check of the printer operation.
1
2
3
4
5
6
7
8

E Instruments 4400 Specifications

General

Brand	E Instruments
Model	4400
Category	Measuring Instruments
Language	English