Updating the System Software
To update the system software of your multiclock, it is vital to
ensure steady power supply for at least 10 minutes.
Then follow the instructions below to update the software using
the internal MIDI Sysex bootloader:
• Make sure you have a computer and a proper way to replay MIDI There are Sysex dumpers for all oper-
ating systems available as freeware on
the internet: SysEx Librarian, MIDI-OX
or Simple Sysexxer. Set a waiting time
of 60ms between packages.
Sysex les
• Download the latest system software from our website and load
it into your sysex tool
• Hold down the leftmost (channel 1) and rightmost ( ) button
while turning on your multiclock to enter the bootloader
• Now connect your sysex tool with the multiclock:
– for the classic version, simply connect MIDI Out from your
computer to MIDI In on the machine
– for the USB version, use a USB cable to connect your com-
puter and the machine
• Congure the correct MIDI output in your sysex tool. USB ver-
sions take software updates on USB Midi Output 1
• Start the transmission according to the manual of your sysex
tool. The bootloader on the multiclock will indicate the progress
and start the new software when it is fully loaded
To Next Page
Loading...