14
| P a g e
2.11 Liter Factor (LF)
When ENTER key is pressed from “LF1.000”, the last digit of the
display value will start flashing. 1.000 is the default value for liter
conversion. Customer can change the value as per the specific liquid’s
conversion factor.
Use Zero key for the increment and Tare key for the decrement and
N/G key for the shift.
If user wants to enter the LF more than 1.000 the display will ask to
enter the password “PASSWd” and we have to enter 7968 using zero
key for increment, Tare key for decrement and N/G for shift.
2.12 Stability (Stb)
When ENTER key is pressed from “Stb 01”, the display will start
flashing last digit ‘01’. Default value is 01.
Stability is the time required for the weight placed on the scale to
become stable.
Unstability is indicated by a sine symbol on the left side of the
display in the weighing mode.
When the sine symbol is not flashing, the weight is stable. When the
symbol flashes, the weight is unstable.
2.13 Sensitivity (SEn)
When ENTER key is pressed from “SEn 00”, the display will start
flashing last digit ‘00’. Default value is 00.
It can be changed based on the site environments to avoid the
frequent fluctuations in the weight values.
To Next Page
Loading...