Eagle Nebula - 5. Factory Settings Menu; 5.1 Scale Settings Configuration; 5.1.5 Scale Range Selection

37
| P a g e
4.4 Remote Display (rd)
This function is temporarily not available.
Press Tare key to go to the next menu.
5 Factory Settings
5.1 Scale Setting (SCSt)
5.1.1 Snr
This is for engineering purpose. Not applicable for the user.
5.1.2 Month (Mon)
This is for engineering purpose. Not applicable for the user.
5.1.3 Year (yr)
This is for engineering purpose. Not applicable for the user.
5.1.4 Production Date (Pdt)
This is for engineering purpose. Not applicable for the user.
5.1.5 Range (rng)
In this indicator three different ranges are available.
 Sr- (Single Range)

Dr- (Double Range)

tr - (Triple Range)
When ENTER key is pressed from “rnG Sr”, the display will start
flashing ‘Sr’. Default value is Sr.
We can select the range as per the requirement.
5.1.5.1 SR-Single Range
If we select SR, then we can use the scale for one capacity.