Eagle Nebula - 4.1.9 RS232 Decimal Point Transmission; 4.1.10 RS232 Transmit Sign Control

31
| P a g e
4.1.9 Decimal Point Transmit (dp)
When ENTER key is pressed from “dp Y”, the display will start flashing ‘Y’.
Default value is Y.
We can select either Yes or No to transmit the decimal point along with
the weight.

Y-Yes (To transmit decimal point)

N-No (Do not transmit decimal point)
If we keep N (NO), then if the weight in the display is 8.532 (considering
F -Forward in previous settings), then in RS232 the weight will be
transmitted as 8532
Press ‘ENTER’ button to select,and after selection the display will show the
dp Y or dp n as per the selection.
Press Tare key to go to the next paramter.
4.1.10 Transmit Sign (SG) :
When ENTER key is pressed from “SG Y”, the display will start flashing ‘Y’.
Default value is Y.
We can select either Yes or No to transmit the weight sign (positive or
negative) along with the RS232 string.

Y - Yes (To transmit sign)
 N-No (Do not Transmit Sign)