Eagle Nebula - 2.14 Weight Accumulation Mode; 2.15 Check Weighing and Counting Modes

15
| P a g e
2.14 Accumulation (ACC)
When ENTER key is pressed from “ACC M”, the display will start
flashing ‘M’. Default value is M.
Accumulation of displayed weight can be done using this function. Auto
and manual modes are available.
A-Auto- Every time before adding the current stable weight to the
accumulation memory it checks for the stability and second accumulation
will be done only after removing the first weight and display returns to
zero.
M-Manual- Accumulation can be done using M+/MR key.
tH-Thresh Hold value- It is related to the accumulation auto mode.
You can enter a threshold value here when the weight is above this
threshold value, the auto accumulation will happen when the weight is
stable.
Clear accumulation memory can be done using Func + Zero key.
Func/Esc + M+/MR - Show the total accumulated weight
Func/Esc + Tare - Show the total accumulated times
2.15 Check Weighing(CHC)
When ENTER key is pressed from “CHC Wt”, the display will start
flashing ‘Wt’. Default value is Wt.
In check weighing here 2 types are available
1. Check weighing (Wt)
2. Check Counting (Ct)
Use Zero key for the increment and Tare key for the decrement to
select the type.