38
| P a g e
5.1.6.2 DR-Dual Range
If we select DR, then we can use the scale for dual capacities. For
example we can use the scale up to 10 kg with 1 g as the division and
above 10 kg to 20 kg, we can use the scale with 2 g as the division.
5.1.6.3 TR-Triple Range
If we select TR, then we can use the scale for triple capacities. For
example we can use the scale up to 10 kg with 1 g as the division and
above 10 kg to 20 kg, we can use the scale with 2 g as the division and
above 20 to 30 kg, we can use the scale with 5 g as the division.
Once the range is chosen, press ‘ENTER’ button to select and after
selection the display will go to the previous menu.
5.1.7 Capacity
Here the scale allows the user to enter the full scale value. For example if
we use the scale in single range and our desired scale capacity/full scale
is 10 kg then we can enter 10000 here.
If triple range is selected for instance, then scale will ask us to enter
Capacity 1, Capacity 2 and Capacity 3.
In this case Capacity 1 > Capacity 2 > Capacity 3
5.1.8 Division (di)
The following are the division values available in the scale - 1, 2, 5, 10,
20, 50
To Next Page
Loading...