44
| P a g e
To do the accumulation of the second weight, the first weight has to be
removed and then the new weight should be kept and same procedure
should be followed to accumulate the weight one by one.
To view to accumulated weight press Func + M+/MR the display will
show the accumulated weight.
Press Func key to go weighing mode.
To view to accumulated time press Func + Tare the display will show the
accumulated time. Press Func key to go weighing mode.
To End the accumulation & clear accumulation memory press Func +
Zero key. Once accumulation memory is cleared, Add-AC message will be
displayed.
For accumulation prints refer the section 5.7.
To Previous Page
Loading...