Eagle new IDA - Specifications and Technical Characteristics; Sensor Characteristics

34
SPECIFICATIONS AND TECHNICAL CHARACTERISTICS
General information
Alliage S/A Industrias Médico Odontológica
Telephone: +55 (16) 3512-1212
Address: Rodovia Abrão Assed, Km 53 - Recreio Anhangüera
Ribeirão Preto – SP - Brasil CEP 14097-500
Name
Intraoral Dental Digital Imaging Sensor
Model
New IDA
Equipment Classification
Classification class according to ANVISA
Class I
Classification class according to CE
Class IIa
Classification of the Equipment according to the NBR IEC 60601-1 regulation
Classification of the product for applied parts
Applied parts BF type
Protection Against Electrical Shock
Class II
Protection Against Harmful Water Infiltration
IP00 - This product is not protected against
harmful water infiltrations and particulate
matter.
Degree of application security in presence of one
flammable anesthetic mixture with the air,
oxygen or nitrous oxide
Inappropriate equipment
Operation Mode
Continuous operation
Input Voltage
+5 Vdc
Input Current
300 mA
Power Consumption
1.5 W
Cable length
3 m
Characteristics of the sensor
Size*
0
1
2
Sensor resolution
(pl/mm)
25
25
25
External dimensions (mm)
21.7 x 30.3
24.7 x 38.3
30.6 x 44.2
Active surface dimensions
(mm)
17 x 22
20 x 30
26 x 36
Matrix dimension
850 x 1100
1000 x 1500
1300 x 1800
Pixels number (MegaPixels)
0.93
1.50
2.34
Technology
CMOS
CMOS
CMOS
Gray level
4096
4096
4096
Image resolution
12 bits
12 bits
12 bits
Image format
TIFF, JPG, PNG, BMP
DICOM
TIFF, JPG, PNG, BMP
DICOM
TIFF, JPG,
PNG, BMP
DICOM
Optical Fiber
1
1
1
Weight
60 g
65 g
70 g
Connection
USB2 - High speed
USB2 - High speed
USB2 - High
speed
Cable lenght
3 meters
3 meters
3 meters
* Order on request