5. Service
a) Have your tool repaired only by qualied specialist personnel and only with
original spare parts. This ensures that the tool safety is maintained.
b) If the supply cord is damaged, it must be replaced by the manufacturer or it’s
service agent or a similarly qualied person in order to avoid a safety hazard.
3. Safety Instructions for Spray Guns
CAUTION! Wear breathing equipment: Paint mist and solvent vapours are damaging
to health. Always wear breathing equipment and only work in well ventilated rooms or
using supplementary ventilating equipment. It is advisable to wear working clothing,
safety glasses, ear protection and gloves.
CAUTION:
DANGER OF INJURY! Never point the spray stream towards
human beings or animals.
Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket-outlet!
•
DO NOT use the spray guns to spray ammable substances.
•
The spray guns are not to be cleaned with ammable solvents.
•
Caution against dangers that can arise from the sprayed substance and observe
the text and information on the containers or the specications given by the
substance manufacturer.
•
DO NOT spray any liquid of unknown hazard potential.
•
The device may not be used in workplaces covered by the explosion-protection
regulations.
•
To avoid the hazard of explosion when spraying, provide for eective natural or
articial ventilation.
•
There must be no sources of ignition such as, for example, open res, smoke of
lit cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc
in the vicinity during spraying.
•
Ensure that no solvent vapours are sucked in by the unit. Do not spray onto the
unit!
•
The spray gun is not a toy; children must therefore not be allowed to handle it
or play with it.
•
Before working on the spray gun remove the power plug from the socket.
To Next Page
Loading...
