Earlex HV4901 - Description; Scope of Delivery; Field of Application; Coating Materials Suitable for Use

EN
14
HV4901
•
Cover areas that are not to be sprayed. When working keep in mind that wind,
for example, may transport paint mist over great distances and cause damage.
•
The units may only be used with a functional valve. If paints rises in the
ventilating hose (Fig. 1, item 18) do not operate the unit further! Dismantle
and clean the ventilating hose, valve and diaphragm and replace the diaphragm
if necessary.
•
DO NOT lay the spray gun down on its side.
With original EARLEX accessories and spare parts, you have the guarantee that all
safety regulations are fullled.
4. Description/ Scope of delivery
Description/ Scope of delivery (Fig. 1/2)
1) Perfect Spray 800 spray attachment 2) Air hose
3) Adapter (with bleed) 4) Retainer clip (for Air hose)
5) Cover of air lter compartment 6) Air lter
7) Gun handle 8) I-Spray 1300 spray attachment
9) Feed hopper (2 pcs.)* 10) Replacement nozzle seal (2 pcs.)*
11) Practice poster 12) Operating instructions
13) Lubricating grease (without illustration)* 14) Gun docking bay
* This is inside the I-Spray container: remove it before starting operations!
5. Field of application
Many dierent coating substances can be processed with the SprayStation HV4901.
A dierent spray attachment must be used, depending on the coating substance:
Coating Materials Spray attachment
Low-viscosity coating substances:
Water- and solvent-based paints, nishes,
primers, 2-component paints, clear
nishes, automotive nishes, staining
sealers and wood sealer-preservatives.
All coating materials with the red Perfect
Spray logo
Perfect Spray (anthracite)
Interior wall paint (dispersions and latex
paint)
All coating materials with the green
Perfect Spray logo
I-Spray 1300 (white)