What to do if USB communication fails on Eaton 5E?
If USB communication fails with your Eaton UPS, it may be due to a defective cable connection. Re-connect the USB cable. If the issue persists, contact your service representative.
How to fix Eaton UPS with no LED display?
If there is no LED display on the front panel of your Eaton UPS, the battery may be weak and needs charging for up to 8 hours. Alternatively, the battery could be defective, requiring a replacement with the same type of battery. Finally, ensure that the power switch is pressed.
How to troubleshoot no LED display on Eaton 5E front panel?
If there is no LED display on the front panel of your Eaton UPS, it could be due to a few reasons. The battery may be weak, so charge it for up to 8 hours. Alternatively, the battery may be defective, requiring a replacement with the same type of battery. It's also possible that the power switch is not pressed, so try pressing it again.
Why is my Eaton 5E beeping every 1.5 seconds?
The Eaton UPS is beeping every 1.5 seconds because it is operating on battery power with a low battery. Prepare your equipment for shutdown, as the actual time to shutdown may vary significantly.
How to fix Eaton UPS USB communication failure?
If USB communication fails, the cable connection may be defective. Re-connect the USB cable; if it is still not available, contact your service representative.
General| Output Voltage | 230V |
|---|---|
| Form Factor | Tower |
| Interface Port | USB |
| Input Frequency | 50/60 Hz |
| Topology | Line-interactive |
| Battery Type | Sealed Lead-Acid |
| Protection | Surge protection |
| Output Frequency | 50/60 Hz |
| Output Power Capacity | 2000VA/1200W |
Symbols indicating electrical hazards like dangerous voltage and battery risks, requiring caution.
Symbols related to general information, guidance, and procedures like disconnecting power and maintenance.
Symbols specifying environmental conditions and placement requirements for the UPS.
Details Eaton's environmental protection policy and eco-design approach for products and packaging.
Highlights the advantages of the Eaton 5E UPS for protecting sensitive electronic equipment.
Overview of the standard installation procedure for the UPS unit.
Provides detailed weight and dimensional specifications for different UPS models.
Details the components and indicators on the front panel of the UPS.
Details the connectors and ports available on the rear panel of the UPS.
Guidance on inspecting the UPS for damage and verifying package contents.
Instructions for positioning the UPS in a suitable location for optimal performance and ventilation.
Details on connecting the UPS to power, including AC input and protected outlets for equipment.
Instructions for connecting the UPS to a computer using the USB port for monitoring and management.
Covers initial power-up, battery charging, button functions, and how to start the UPS.
Procedure for operating the UPS when disconnected from the AC power source.
Instructions on how to properly power down and shut off the UPS.
Explanation of different UPS operating states indicated by the LED and audible alarms.
How the UPS behaves and restarts when AC power is restored after an outage.
Guidelines for cleaning and maintaining the UPS for optimal performance and longevity.
Instructions for storing the UPS for extended periods, including battery recharging.
Information on proper disposal and recycling of the UPS and its batteries.
Explains how the UPS indicates events, alarms, and faults through LEDs, beeps, and messages.
Provides a chart to diagnose and resolve common UPS conditions and alarms.
Details on contacting Eaton for technical assistance, required information, and warranty service.
Details the electrical input parameters including voltage, current, and frequency windows.
Details the electrical output parameters in normal and battery modes, including voltage regulation and efficiency.
Provides specifications for internal batteries, type, and monitoring capabilities for failure detection.
Lists safety standards, EMC compliance, agency markings, and protection degrees for the UPS.
Details operating temperature, humidity, altitude, and audible noise levels for the UPS.
To Next Page
